Tape Reel

• Art. Nr: 301010
• Size: 10-1/2" x 3" (266.7 x 76.2 mm)
• Material: Please contact sales
• Construction: Open frame with a central cylinder, as shown in the catalog photo
• Handle: No handle shown

Product Name & Model

What the catalog shows. The Tape Reel is shown as an open frame with an upright cylinder at the center, end plates at both ends and a bar across the top. Its nominal size is 10-1/2" x 3" (266.7 x 76.2 mm). The catalog gives only the product name and the size.

Core Features

• Open frame, no housing. There is no enclosed interior, so dirt can be cleaned off from the outside.
• Central cylinder. An upright cylinder stands at the center of the frame to hold a roll of tape.
• Nominal size 10-1/2" x 3", one art number, 301010.
• Tape types and carry method: please contact sales.

Product Advantages

Keeps the tape roll in one place. A tape reel holds the roll on the frame instead of leaving it loose in a pouch or on the floor, where it can pick up dirt.

Open frame cleans easily. With no enclosed interior, residue can be wiped or scraped off the outside of the frame.

One art number, one size. This product has a single entry, 301010, size 10-1/2" x 3".

How to Use

Basic use

• Fit the roll of tape over the central cylinder and pull tape from the roll as needed.
• Check that the roll turns freely before you start. A roll that binds may tear as it is pulled.
• Tape types, roll core sizes and carry methods: please contact sales.

FAQ

Q1. What tape does it take?
The catalog gives only the product name and the size, 10-1/2" x 3". For compatible tape types and roll core sizes, please contact sales.

Q2. How is it carried?
The catalog does not state a carry method. Please contact sales.

Q3. Is it available in other sizes?
No. The catalog lists one art number, 301010, size 10-1/2" x 3".

Specifications Overview

Frame

Tape compatibility

Selection Guide

Choosing a tape reel

The catalog lists one tape reel, 301010, size 10-1/2" x 3". Before ordering, confirm the type and size of the tape roll you want to hold and how you plan to carry or place the reel. Please contact sales if you need help.

Full Size Reference

This product has one article number.

Other art numbers in the same Leading Tools range: 301002 Line Pin (6"), 301015 Roll Lifter (15"), 301110 Skate Wheel Mortar Raker (7").

Care & Maintenance

• Clean after use. Wipe or scrape dirt and residue off the frame before it hardens. There is no enclosed interior, so everything is on the outside of the frame.
• Keep the central cylinder clean and smooth. Residue on it makes the roll drag.
• Dry the frame after washing and store it in a dry place, not standing in water or on a wet floor.
• If rust appears, remove it with a fine abrasive and wipe on a thin film of oil. Keep oil off the tape.